NOTICE: Some of our development stock is supplied on cardboard spools with a 2mm thick flange, these are somewhat flimsy so not strong enough for spools runners. The good news is that we are offering these with a substantial discount via our bulk boxes. Our final release UK PLA has a number of improvements, this includes 4mm thick flanges, which are much stronger.
Changeover spools are created in the transition from one production colour to the next. Generally, there are three types of changeover spool: colour to colour, colour to natural and ‘almost’ colour. The ‘almost’ colours are mostly the same as production spools, some virtually indistinguishable, but others may taper off colour density either at the start or end of the spool.
Those listed as ‘EXPERIMENTAL’ contain large aluminium flake and should only be purchased by experienced users. Large nozzle required, minimum 0.6mm, hot/cold pull after use.
3DTomorrow UK PLA Filament
PLA (Polylactic Acid) is one of the most commonly used 3D Printing filaments, chosen for its good value, ease of printing and bio-based production. 3DTomorrow’s UK PLA is supplied on a cardboard spool, which is 100% recyclable, so this product can help you reduce your carbon footprint vs buying plastic spooled alternatives.
What to expect from 3DTomorrow UK PLA?
As a print service ourselves, we know that filament quality is of utmost importance and would never sell a product that we would not use. Our UK PLA filament can be used to produce excellent quality prints, thanks to great interlayer adhesion, low warp and tangle-free spooling. Another great thing about our filament is the consistent strong colours, which ensure colour match even if you have to change spool midway through a batch.
3DTomorrow UK PLA is vacuum sealed with a desiccant directly after manufacture, so you can rest easy knowing your filament will arrive in good form. We pride ourselves when it comes to environmental best practices and quality assurance, you can read more about this here.
|Settings||Guidelines||We like to use|
|Hot End Temperature||200-235ºC||220ºC|
|Heated Bed Temperature||OFF / 50±10ºC||50ºC|
|Heated Bed Adhesion||Blue Painters Tape, Glue Stick, 3rd Party Print Sticks||We used to glue stick, now we use our own blend (adding to the shop soon).|
|Print Speed||30-90mm/sec||Generally 45mm/sec|
|Fan Speed||0-100%||50-100% (part dependent)|
If you have any issues, drop us a line: [email protected]
- Easy to Print & Low Warp
- Sharp Details
- Can be printed on a cold surface
- Low heat resistance – deforms 55-60°C
- There are stronger filaments