3DTomorrow Masterspool Silk PLA Filament
PLA (Polylactic Acid) is one of the most commonly used 3D Printing filaments, chosen for its good value, ease of printing and bio-based production. 3DTomorrow’s Masterspool PLA is made from quality NatureWorks PLA, so not only do you get a good filament but you can also save money and reduce your carbon footprint vs buying plastic spooled alternatives. Looking to be even more environmentally friendly? Our flagship Eco PLA is made from recycled material.
What to expect from 3DTomorrow Masterspool Silk PLA?
As a print service ourselves, we know that filament quality is of upmost importance and would never sell a product that we would not use. Our Masterspool PLA filament can be used to produce excellent quality prints, thanks to great interlayer adhesion, low warp and a beautiful shine. The Masterspool concept is also a great way to personalise your product as you can print them in any colour you want, or go one step further on the Eco front and use up all your filament ends.
3DTomorrow Masterspool PLA is vacuum sealed with a desiccant directly after manufacture, so you can rest easy knowing your filament will arrive in good form. We pride ourselves when it comes to environmental best practices and quality assurance, you can read more about this here.
|Settings||Guidelines||We like to use|
|Hot End Temperature||185-215ºC||215ºC|
|Heated Bed Temperature||OFF / 50±10ºC||50ºC|
|Heated Bed Adhesion||Blue Painters Tape, Glue Stick, 3rd Party Print Sticks||We used to glue stick, now we use our own blend (adding to the shop soon).|
|Print Speed||30-90mm/sec||Generally 45mm/sec|
|Fan Speed||0-100%||50-100% (part dependent)|
If you have any issues, drop us a line: [email protected]
- Easy to Print & Low Warp
- Sharp Details
- Can be printed on a cold surface
- Low heat resistance – deforms 55-60°C
- There are stronger filaments
Is PLA not ticking all your boxes? Our Pro PETG may be what you are after.